Sub-Total: $0.00
Quoted & Supported by B&C
B&C Industrial Products quotes, ships and supports Hamaco lift tables nationwide.
Hamaco Lift Tables: Electric Mechanical Lift Tables & Hydraulic Lift Carts
Ball screw electric lift tables, electric-hydraulic lift tables, foot-pump hydraulic lift carts and a lift and tilt table. Japanese-engineered lift tables, supported in the US by Hamaco Industries in Georgia. Quoted, delivered and supported by our team.
Ball Screw DriveNo hydraulic oil
1 Metric TonLifted on 110V power
100,000 CyclesMLI continuous rating
Lift Table SpecialistJapanese engineering
Who Hamaco Is, and Why We Carry Them
Hamaco Industries Corporation is the US arm of Hamada Industry Co., Ltd. of Japan, supported from Georgia. Hamaco is a lift table specialist. It is best known for “mechanical” electric lift tables that raise the platform with a ball screw driven by a brushless motor, the same type of motor used in hybrid cars, instead of a hydraulic pump. Hamaco showed that mechanical lift table line to the US market at MODEX 2014.
Nearly everything Hamaco makes is a lift table of some kind: ball screw electric lift tables, electric-hydraulic lift tables, foot-pump hydraulic lift carts, and a lift and tilt table. In Japan, Hamaco says it holds about 70% of the market for hydraulic foot-operated lifters. It also makes a few ergonomic extras, such as a pallet leveler and pallet trucks. If you need one of those, ask us for a quote.
We carry Hamaco because an electric lift table that runs on ordinary shop power and uses no hydraulic oil solves problems a standard hydraulic table can’t: clean areas, bench-height work, and stations where a slowly sinking load is not acceptable. Our part is matching the series to your load, height and power, quoting it, and getting it to your door.
What Actually Sets Hamaco Apart
Hamaco’s edge is how its lift tables lift. These four points come from Hamaco’s own published material.
Ball Screw Drive
No oil, and no drift
Hamaco’s mechanical lift tables use a ball screw instead of a hydraulic cylinder. There is no hydraulic fluid, so there is nothing to leak onto the floor or the product. Hamaco says the load holds its height without creeping down, positioning is accurate, speed stays steady as the load changes, and the table runs quieter than a hydraulic unit.
Motor
IPM brushless motor with vector control
The drive is an interior permanent magnet (IPM) brushless motor. Hamaco says it uses up to 30% less power than a conventional SPM motor. Vector control gives smooth starts, accurate stops and steady speed whatever the load, and with no brushes there are no brushes to wear out.
Power
Heavy loads on standard 110V power
Hamaco says its lifters can raise one metric ton on a 110V supply. The 2,205 lb MLP-1000 and MLI-1000 models are listed at 110–115V single phase, so many stations need no new three-phase drop.
Cycle Life
MLI rated for 100,000 continuous cycles
Hamaco rates its MLI Heavy Duty series for up to 100,000 continuous cycles. If the table moves on every part rather than every pallet, that rating is the number to compare.
Find Your Hamaco Product
The Hamaco lineup in one place: 10 series across four product lines. Every product has a Get Info & Pricing button that carries what you clicked straight into the form at the bottom, so you do not need the model number.
Electric Mechanical (Ball Screw) Lift Tables
This is the heart of the Hamaco line. A ball screw electric lift table raises the platform with a motor-driven screw, not hydraulic oil. It suits clean areas, bench-height work and any station where the load has to stay exactly where you set it. Bellows skirts, a turntable top and a synchronized two-unit setup are available on some series.
MLP — Built-In Power Unit
551 – 4,409 lbs in the models we list
IPM motor, bellows options
MLI Heavy Duty
220 – 4,410 lbs
Rated to 100,000 continuous cycles
MLM Mini
220 – 551 lbs
Compact, raises to 41.3 in. on wide-travel models
Photo coming soon
MLI Turntable Top
Ball screw lift with a turntable top
Model MLI-1000-1113-12-TN
The MLP family also includes mini units starting at 220 lbs. Tell us the load and we will match the model.
Electric-Hydraulic Lift Tables
When a station needs a conventional powered scissor lift table, Hamaco builds the MLE: an electric-hydraulic table with a high-rigidity frame and built-in cylinders. Our MLE listing runs up to 4,409 lbs on 220V three-phase power, with standard or full bellows. Ask us to confirm the model that fits your load and platform.
MLE Electric-Hydraulic Lift Table
Electric-hydraulic scissor lift
Standard or full bellows
Hydraulic Lift Carts & Mobile Lift Tables
Hamaco’s HLH hydraulic lift carts are mobile lift tables you raise with a foot pump. They need no power, so they roll from station to station and bring the work to a comfortable height wherever it lands. Hamaco says the HLH Standard drifts no more than 2% over 15 minutes. Versions include standard, aluminum, roller-top, bellows, stainless steel, handle-less and ultra-low.
HLH Work Carts
Up to 2,205 lbs
Foot pump, raised heights 23.6 – 67.9 in.
HLH Roller Conveyor Carts
287 – 992 lbs
Roller top, built-in stopper, braked casters
Photo coming soon
HLH Stainless Steel
SUS304 stainless steel
Washable and water-resistant
Photo coming soon
HLH Ultra-Low
Ultra-low lift cart
Lowers to 3.2 in.
Hamaco’s roller-top range goes up to 1,984 lbs. The models listed on our site cover 287 to 992 lbs; ask us for the heavier ones.
Lift and Tilt Table
The MLI Tilt combines a ball screw lift with a 45° tilt. Hamaco designed it so carts can be loaded as they are for assembly work, with the part raised and angled toward the operator instead of the operator bending over it.
MLI Tilt — MLI-1000-1013TILT
2,205 lbs
30.7 in. lift stroke, 45° tilt
Ball Screw vs. Hydraulic: Which Hamaco Lift Do You Need?
Hamaco builds both kinds of lift table. The right one depends on whether oil is allowed, what power you have at the station, and whether the load has to move.
| Ball screw electric (MLP, MLI, MLM) | Electric-hydraulic (MLE) | Hydraulic lift cart (HLH) | |
|---|---|---|---|
| How it lifts | Motor turns a ball screw | Electric pump and hydraulic cylinders | Foot pump and hydraulic cylinder |
| Hydraulic oil | None | Yes | Yes |
| Power needed | 110–115V single phase up to 2,205 lbs; 220V three phase on heavier MLI models | 220V three phase (our listing) | None, foot operated |
| Capacity | 220 – 4,410 lbs | Up to 4,409 lbs (our listing) | Up to 2,205 lbs |
| Moves around the floor? | No, stationary | No, stationary | Yes, on casters |
| Pick it when | Oil is not allowed, or the load has to hold an exact height | You want a conventional powered scissor table and have three-phase power | The load has to travel between stations |
Not sure which fits? Tell us the load, the height and what power is at the station. That is usually enough to point you to one series.
Where Hamaco Lift Tables Go to Work
Hamaco lift tables are built for ergonomic work: bringing the job to a comfortable height to cut bending and repetitive strain.
Bench & Small-Parts WorkCompact tables for factory detail work and desk-side stations
Clean, Oil-Free AreasBall screw tables with no hydraulic fluid to leak
Assembly StationsMLI Tilt raises and angles parts toward the operator
Machining, Packing & InspectionHolding parts at a steady working height
Moving Parts Between StationsRoller-top HLH carts slide product on and off
Wash-Down AreasStainless steel HLH carts that can be washed
What We Need From You to Quote a Hamaco Unit
Hamaco’s lineup splits on a few simple questions. Answer these and we can point you to the right series and give you a real number.
| What we ask | Why it changes the machine |
|---|---|
| Load weight | The heaviest item, plus any fixture or container. This sets the series and size |
| Platform size | The footprint of the load |
| Lowered and raised height | A low lowered height helps when loading hand carts; tall raised heights need high-lift models |
| Stationary or mobile | Stationary points to MLP, MLI or MLE; mobile points to an HLH lift cart |
| Power at the work spot | 110–115V single phase or 220V three phase, at the station itself |
| How often it cycles | Lifts per hour or per shift |
| Options and environment | Bellows, roller top, tilt, turntable top, stainless or aluminum, hand or foot control, no-oil requirement |
| Ship-to address | Dock or liftgate needs, for the LTL freight or local delivery in your quote |
Don’t have all of it? Send what you have. A photo of the station and a description of what you are lifting is a fine start, and we will ask the rest.
Common Questions
Does B&C Industrial sell Hamaco lift tables?
Yes. B&C Industrial Products quotes, supplies and supports Hamaco lift tables and lift carts nationwide. Every quote includes LTL freight or local delivery.
What is a mechanical (ball screw) lift table, and how is it different from a hydraulic lift table?
A mechanical lift table raises the platform with an electric motor turning a ball screw. A hydraulic lift table uses a pump pushing oil into a cylinder. Hamaco says its ball screw tables use no hydraulic oil, hold their height without creeping down, position accurately and run quieter. A hydraulic table is the familiar choice for general lifting; a ball screw table fits clean areas and stations where the height has to stay exactly put.
Can a Hamaco electric lift table run on a standard 110V outlet?
Many can. Hamaco says its lifters can raise one metric ton on 110V power, and the 2,205 lb MLP-1000 and MLI-1000 models are listed at 110–115V single phase. Heavier MLI models and the MLI Tilt lift use 220V three phase, and our MLE listing is 220V three phase. Tell us what power is at the station and we will match the model.
Which Hamaco hydraulic lift cart do I need?
Start with weight and how the load gets on and off. HLH work carts handle up to 2,205 lbs and come in standard, high-lift and bellows versions. Roller-top HLH carts let you slide product on and off. The stainless steel version is washable for wet areas, and the ultra-low version lowers to 3.2 in. All are foot-pump operated and need no power.
Does Hamaco make a lift and tilt table?
Yes. The MLI Tilt (MLI-1000-1013TILT) lifts 2,205 lbs with a 30.7 in. stroke and tilts to 45°. Hamaco designed it so carts can be loaded as they are for assembly work.
What warranty comes with Hamaco equipment?
Warranty terms vary by model. We confirm them with Hamaco and include them with your quote, so you know the terms before you order.
Who is Hamaco Industries?
Hamaco Industries Corporation is the US arm of Hamada Industry Co., Ltd. of Japan, supported in the US from Georgia. Hamaco specializes in ergonomic lift tables, especially ball screw electric lift tables, and showed its mechanical lift table line to the US market at MODEX 2014.
How much does a Hamaco lift table cost?
Hamaco equipment is quote-only. Price depends on the series, capacity, platform, power and options. Send us the load weight, platform size and heights you need, and we will quote it with LTL freight or local delivery included.
Get Information or a Quote
You do not need to know the model number. Tell us what you are lifting and how high it has to go, and we will work out which Hamaco unit fits. If you clicked a product above, it is already filled in below.
You are asking about
Prefer email or phone? Call (888) 276-3386 or email rfq@bandcip.com. Every quote includes LTL freight or local delivery. We ship nationwide from Garrett, Indiana.
More Lift Equipment at B&C
Hamaco is one of several lift table manufacturers we carry. If your job points somewhere else, these are the other lines we quote from.
Hamaco Products We Carry
Every Hamaco product listed on bandcip.com, pulled live from our catalog. All lift equipment is quote-only, and every quote includes LTL freight or local delivery. Don’t see the series you need? It may be in the lineup above; ask us for a quote.
Showing all 6 results
Hamaco HLH Hydraulic Push Cart – 176 to 2205 lb Capacity
- 176 to 2205 lbs capacity
- 23.6″ x 47.2″ max table
- 67.9″ max table height
Hamaco HLH Roller Conveyor Lift Cart – 287 to 992 lb Capacity
- 287 to 992 lbs capacity
- 23.6″ x 35.4″ max table
- Roller conveyor top
Hamaco MLE Hydraulic Electric Lift Table – up to 4409 lb Capacity
- 330 to 4409 lbs capacity
- 220V 3-phase power
- Up to 15 cycles per hour
Hamaco MLI Heavy Duty Electric Mechanical Lift Table – 220 to 4410 lb Capacity
- 220 to 4410 lbs capacity
- Rated to 100000 cycles
- 115V 1-ph, 220V or 460V 3-ph
Hamaco MLI Tilt Ball Screw Lift and Tilt Table – 2205 lb Capacity
- 2205 lbs capacity
- 45 degree tilt
- 19.1″ to 49.8″ table height
Hamaco MLP Ball Screw Electric Mechanical Lift Table – 551 to 4409 lb Capacity
- 551 to 4409 lbs capacity
- Ball screw drive, no hydraulic oil
- 115V AC or 24V DC models