Specifications
TRANSFER ARM: 7 ga. formed channel.
TRANSFER CHAIN: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain.
STANDARD LENGTHS: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths.
CHAIN CENTERS: 18”
CHAIN TAKE-UP: Screw Type.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
LIFT: Pivot type.
BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.
CHAIN SPEED: 35 FPM constant.
MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor.
CAPACITY: 3000 lbs.
AIR CONTROLS: Air bag(s) with single solenoid valve. (60-80) psi required.
CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also.
ELECTRICAL CONTROLS: Optional.
