Sub-Total: $0.00
Southworth PalletPal 360 Air Pneumatic Load Leveler – 400 to 4500 lb Capacity
Quote-only. Every model on this page is priced to your application. Pick the models you need below and we reply with a quote, usually the same or next business day. Or call (888) 276-3386. Quote-only. This product is priced to your application. Request a quote below and we reply, usually the same or next business day. Or call (888) 276-3386.
Product photo coming soon
- Up to 4500 lbs capacity
- 9 1/2″ lowered to 27 3/4″ raised
- 43 5/8″ turntable
Choose your model
Tick every model you want priced and set a quantity. Your picks are carried into the quote form below.
This series is quoted as a whole. Use the form below and tell us the load, platform and height you need.
Request a quote
For this product. Tell us where it ships and what it is lifting and we will size it and price it.Tell us how many and where it ships and we will price it, freight included.
Thanks, we have it.
Your request went to our sales desk. Expect a reply from rfq@bandcip.com, usually the same or next business day.
Need it sooner? Call (888) 276-3386.
Southworth PalletPal 360 Air gives the same automatic leveling as the spring unit but uses an airbag on shop air. It is meant for places where load weights vary widely and change often. Working height is adjusted by adding or removing air.
A small spring works with the airbag for a more linear response, and it limits descent of the unloaded turntable if air is lost. The base stays within the 43 5/8 inch turntable ring for 360 degree access with no reach-over.
Southworth PalletPal 360 Air Specifications
| Specification | Value |
|---|---|
| Capacity | 400 – 4500 lbs |
| Lowered (compressed) height | 9 1/2″ |
| Raised (extended) height | 27 3/4″ |
| Rotating ring outer / inner diameter | 43 5/8″ / 40 5/8″ |
| Base frame | 36″ x 36″ |
| Max load dimensions | 50″ x 50″ x 72″ |
| Air source | 80 psi |
| Max system pressure unloaded / loaded | 30 psi / 65 psi |
| Approx. shipping weight | 435 – 450 lbs |
| Operating environment | Indoor, 0 – 120 deg F |
The 2026 brochure lists capacity as 300 – 4500 lbs and 435 lbs shipping weight; the owner’s manual lists 400 – 4500 lbs and about 450 lbs. We confirm with Southworth at quote.
Key Features
- Airbag actuation on shop air; set height by adding or removing air
- Small assist spring for linear response and protection on air loss
- 43 5/8 inch low-friction, bearing-supported turntable
- Fully guarded air outlet and gauge; airbag protected in the down position
- Pressure relief valve and manual discharge valve
- Fork channels for relocation; optional caster or leveling-feet kits
Common Applications
- Palletizing where pallet weights vary from job to job
- Mixed-SKU depalletizing at a workstation
- Shared stations that are moved by fork truck or caster kit
- Indoor shipping and packing areas with shop air
How to Choose the Right Pneumatic Pallet Load Leveler
Choose the Air unit over the PalletPal 360 Spring when load weight changes often. Instead of swapping springs, you adjust system pressure; the spring version is simpler if pallets stay about the same.
Both use the same 43 5/8 inch turntable and base footprint. The optional leveling feet kit raises the unit about three inches so manual or powered pallet jacks can be used, and the caster kit adds a floor lock.
Frequently Asked Questions
What air supply does it need?
An 80 psi air source. Do not exceed 30 psi unloaded at full raise; maximum loaded system pressure is 65 psi.
How is working height adjusted?
By adding or removing air from the system. The platform then rises and lowers automatically as the load changes.
What happens if air is lost?
A small spring restricts the descent of the unloaded turntable in the event of accidental air loss.
What is the largest load it takes?
Southworth lists load dimensions of 50 x 50 x 72 inches and capacity up to 4500 lbs.
Can it be used outdoors?
No. The manual lists the operating environment as indoor only, 0 to 120 deg F.
Buying a pneumatic pallet load leveler from B&C Industrial Products
B&C Industrial Products is a material handling distributor in Garrett, Indiana, serving customers nationwide. We stock and quote lift tables, lift carts, positioners, casters, pallet racking and cranes. Every Southworth model on this page is quoted to your configuration, so tell us the load, the platform size and the working height you need and we will spec it.
Talk to a person who sells these every day.
B&C Industrial Products, Garrett, Indiana. Family-owned material handling distributor serving serving customers nationwide.
Call(888) 276-3386Same or next business day
Emailrfq@bandcip.comQuotes, drawings and questions
- 330 to 1760 lbs capacity
- 23.6" x 39.4" max platform
- 49.8" raised height (A-350W)
The Southworth Manual Dandy Lift is a portable foot-pump scissor lift cart. Five models run from the 330 lb L-150 up to the 1760 lb A-800, and the high-lift A-350W reaches 49.8 inches.
The Dandy's design is built around the operator: a 180-degree access foot pedal that can be pumped from the side or the back, an oversized lowering handle reachable from any position, and contoured comfort grips. An integrated floor lock holds the cart in place while you work.
Southworth Manual Dandy Lift Specifications
| Model | Capacity | Platform | Lowered | Travel | Raised | Ship Weight |
|---|---|---|---|---|---|---|
| L-150 | 330 lbs | 17.7" x 28" | 8.3" | 20.7" | 29" | 80 lbs |
| L-250 | 550 lbs | 19.7" x 31.5" | 9.5" | 22.2" | 31.8" | 115 lbs |
| A-350W | 770 lbs | 23.6" x 35.8" | 17.5" | 36.2" | 49.8" | 230 lbs |
| A-500 | 1100 lbs | 23.6" x 35.8" | 11.8" | 24.8" | 36.6" | 195 lbs |
| A-800 | 1760 lbs | 23.6" x 39.4" | 13.6" | 27.2" | 40.2" | 275 lbs |
The Dandy family also includes the DLV self-leveling Dandy Levelers and the M-500L pallet and skid lifter transporter. Ask us if one of those is the better fit.
Key Features
- Manual foot pump with 180-degree access - pump from the side or the back
- Open-design oversized lowering handle reachable from any position
- Sure-grip cushioning and contoured hand positions
- Integrated floor lock
- Hydraulic jack rated for roughly 400,000 strokes
Common Applications
- Factories, stores and warehouses
- Repair shops and garages
- Nurseries and greenhouses
- Stacking and unstacking
- Adjustable-height work surface
How to Choose the Right Portable Scissor Lift Cart
L-150 and L-250 are the light-duty models for totes and small parts. A-500 and A-800 are the medium and heavy-duty models with the wider 23.6-inch platform.
The A-350W is the one to notice: 770 lbs but 36.2 inches of travel to a 49.8-inch raised height. If your operator needs to load something tall, that extra travel is worth more than raw capacity. If loads change as you stack, ask about the self-leveling Dandy Leveler instead.
Frequently Asked Questions
How much does a Manual Dandy Lift hold?
330 lbs on the L-150 up to 1760 lbs on the A-800.
Which Dandy lifts highest?
The A-350W, at a 49.8-inch raised height with 36.2 inches of vertical travel.
Does it need power?
No. The Manual Dandy runs entirely on a foot pump. Southworth also makes the Powered Dandy if you want push-button operation.
Can the foot pedal be reached from the side?
Yes. The pedal has 180-degree access, so it can be pumped from either side or from behind the unit.
Buying a portable scissor lift cart from B&C Industrial Products
B&C Industrial Products is a material handling distributor in Garrett, Indiana, serving customers nationwide. We stock and quote lift tables, lift carts, positioners, casters, pallet racking and cranes. Every Southworth model on this page is quoted to your configuration, so tell us the load, the platform size and the working height you need and we will spec it.
The Vestil Lift and Tilt Cart with Sequence Select raises a load and then tilts it toward the operator, so parts in a bin or on a pallet come to the worker instead of the worker bending into the bin. A selector lets the operator choose whether the foot pump lifts or tilts, on the same pedal.
Quoted as one configuration: 1000 lb capacity, 35.5" x 19.5" platform, 45 degree tilt, 15" lowered to 32" raised.
Key Features
- Sequence select: one foot pedal lifts, then tilts, without changing pedals
- 45 degree tilt brings the load to the operator
- Two rigid and two swivel polyurethane casters with floor lock
- Steel platform with a formed lip on the low side to hold containers
Common Applications
- Feeding parts from bins and gaylords at a workstation
- Assembly cells where the operator reaches into a container all shift
- Kitting and order picking
Frequently Asked Questions
Can the platform lift without tilting?
Yes. The sequence selector lets the operator lift only, or lift and then tilt.
Does it need power?
No. Lift and tilt are both foot-pump hydraulic.