Portable Buildings by Starrco

Starrco's pre-assembled portable buildings are ideal for both interior and exterior use. Starrco has pre-engineered building kiosks, airport taxi dispatchers, parking booths, toll booths, security guard houses, ticket booths, airport rental car offices, and portable offices.

Pre-fabricated buildings

Maintenance free service

The structural members are either anodized aluminum or steel with a rust retardant finish

The ceiling floor and walls have a solid impact resistant core with a durable aluminum or vinyl covered finish

Windows and sliding doors are aluminum finish

Click Here to Get a Quote!

Specs of Starcco Buildings

Structural

Framework

Corner structural members are constructed from 3-inch by 3-inch, quarter-inch thick aluminum angles. The structural members connecting the panels measure 4 inches by 2.5 inches, made of 3/16-inch thick aluminum "T" extrusions. The upper framework will consist of 2.5-inch by 2.5-inch, 3/16-inch aluminum angles. All aluminum structural components will utilize 6063 alloy in a T6 temper and will be coated in grey enamel paint.

Panels

Ceiling

Floor Base

The base of the building consists of 4-inch structural steel channels, welded, with stringers spaced at a maximum of 24 inches apart.
Base features integrated forklift pockets.
Steel channels are coated with rust-preventive paint.
Sub-flooring includes two layers of a 5/8-inch OSB board with an aluminum vapor barrier underneath.
The finished flooring is made of commercial-grade, seamless vinyl.

Roof

For buildings up to 4 feet wide, the roof comes pre-installed.
Installed roofs feature a .060-inch EPDM membrane bonded to ceiling panels, surrounded by aluminum gutters on all sides.
Buildings wider than 4 feet have roofs made from corrugated aluminum pans.
Roof edges are finished with anodized aluminum gutters and fascia trim.
Roofs for larger buildings are delivered unassembled, prepared for on-site installation by others.

Windows

Doors

Swinging:

The door is constructed from commercial-grade 3068 20ga. steel.
Features a 1/8-inch tempered safety glass window in the upper half.
Equipped with 1½ pairs of 4½" x 4½" ball bearing hinges and a stainless steel key-in-knob lockset.
Mounted in a painted aluminum door frame with wool pile weatherstrip.
The exterior is painted white.

Sliding:

6068 aluminum patio sliding door type.
The upper section is glazed with 3/16-inch tempered safety glass, lower section is solid.
Includes a keyed locking device with a pull handle.
All components are finished in painted aluminum.
Models ending in "-1" include two sliding doors on the long walls.

Electrical