6″ Polyflexon Kingpinless Swivel Caster with Integrated Toe Guard – 41UA60JO64174Y

Description

When the toe guard is part of the casting, the foot protection lasts as long as the caster. The 41UA60JO64174Y puts a steel barrier between the wheel and the foot. It’s a 6-inch Polyflexon polyurethane kingpinless swivel caster, with the toe guard cast directly into the yoke as part of the casting.

Because the guard is part of the yoke casting, it stays with the caster for the life of the caster. There is nothing to loosen, nothing to fall off, and nothing to misplace during a caster swap.

The 6-inch Polyflexon wheel uses a Shore A 95 flex-compound polyurethane on a heavy aluminum core. The donut-pattern tread holds up under repeated load while keeping a stable contact patch. Rated up to 1,000 lbs, -40°F to 180°F.

The 41-series kingpinless construction eliminates the loose-kingpin failure that traditional swivel casters develop under lateral force. The raceway is CNC-machined ASTM45 steel, the ball bearings are hardened, and the top plate is 1/4-inch. The whole rig is built to swivel smooth and stay tight after years of service. The extended swivel radius on the 6-inch and 8-inch frames clears tight turns without binding.

Assembled in-house at our Indiana facility.

Specs

• Wheel: 6 in. dia. x 2 in. wide, Polyflexon polyurethane (orange)
• Wheel durometer: Shore A 95 (+/- 5)
• Wheel temperature range: -40°F to 180°F
• Capacity: up to 1,000 lbs per caster
• Top plate: 4 in. x 4-1/2 in.
• Bearing: precision
• Yoke: kingpinless, swivel
• Toe guard: integrated (cast into yoke)
• Finish: bright zinc