4″ Kinetic® Kingpinless Swivel Caster with Integrated Toe Guard – 41KN40JL63174Y

Description

On a busy plant floor, casters take more impact than anything else under your equipment. The 41KN40JL63174Y puts a steel barrier between the wheel and the foot. It’s a 4-inch Kinetic® polyurethane kingpinless swivel caster, with the toe guard cast directly into the yoke as part of the casting.

Cast as one piece of steel from the foundry, the toe guard inherits the structural strength of the yoke itself. There is no welded joint and no fastener in the load path — the protection is part of the caster geometry.

Kinetic® is our proprietary blend polyurethane wheel, designed by B&C. At 4 inches, capacity runs up to 1,250 lbs. Non-marking, quiet on smooth interior floors.

The 41-series kingpinless construction eliminates the loose-kingpin failure that traditional swivel casters develop under lateral force. The raceway is CNC-machined ASTM45 steel, the ball bearings are hardened, and the top plate is 1/4-inch. The whole rig is built to swivel smooth and stay tight after years of service.

Assembled at our facility in Indiana.

Specs

• Wheel: 4 in. dia. x 2 in. wide, Kinetic® polyurethane (blue)
• Capacity: up to 1,250 lbs per caster
• Top plate: 4 in. x 4-1/2 in.
• Bearing: precision
• Yoke: kingpinless, swivel
• Toe guard: integrated (cast into yoke)
• Finish: bright zinc